Jump to content

Card Sharing


Sinister

Recommended Posts

Summed up a few pages back but basically;

 

1. Make sure you have a dish facing the SKY channels

2. Buy an Openbox S10 or similar box

3. Connect to a router

4. Get a subscription off a cardsharing server; if its recommended they can give deals otherwise rolling monthly

5. Follow the below instructions for the Openbox Setup:

 

BEG U POST A GUIDE ON HOW TO SET UP OPENBOX S10

ALSO CAN IT CONNECT WIRELESSLY TO THE NET OR DO I NEED THE WIRE CONSTANTLY CONNECTED?


Mines connected by wire

set up was easy the test line i had dude sent me the CCcam file i uploaded it and way live

>Your new s10 / s11 box has just arrived what next smiley.gif

Right most of these boxes i have brought have been pre flashed and where it says channel fav file attached it isnt as there is 2 brilliant ones on here smiley.gif

Connect it up hdmi / scart to tv
Sat cable on the in connection not loop
Lan cable to modem / router or wifibridge configured

Next lets get some channels

this is just for 28.2E (skyuk) but you can select others

Press MENU on your controller and go to the icon of a sat dish
The Satellite List put a tick (press ok) on 28.2E then press exit
Still on satellite section choose single satellite scan (if doing more than 28 choose multiple)
Once in there make sure :-

Fta Only is on No
Scan Channel TV + Radio
Scan Mode Blind Scan
Then press ok on search

Once done exit again thats your channels on But the $ ones say scrambled you need a c line from mbox or galaxy or who ever you choose ?

Get the details and save in a text doc as CCcam.cgf now put that on the root of your usb stick
Why your there you can add also if you want the favourite organiser file TP_PROG.dbs whats attached to put all your channels in groups of movies ect But once on the will be FAV1 and Fav2 Ect you need to name them as the following

1. Entertainment
2. Movies
3. Sports / News
4. Music
5. Lifestyle & Culture
6. Documentries
7. Kids
8. HD Channels
9. Red Button / Interactive
10. Shopping
11. Adult

This is done once you have put the file on your box by going menu The Tv icon and favourite and press ok and do as it says on screen to rename

Right you have all files what you need the 2 put them on your usb stick root and put it in your s10 / s11 it will pick it up

Now go menu again but this time go to tools icon and choose Upgrade by usb
Upgrade Mode MISC Files
Then press ok on select file

Press OK On the top one tp_prog then press yellow this will update your fav groups by the file you put on once complete exit and turn off the box and back on thats done

Now you can edit faurite names as mentioned above once done lets set up the ccam go menu and to the globe

First of all go to Network setup and turn dhcp on and apply then exit

Then go to cccam client setup
Update files from usb press ok on CCcam.cfg and then press yellow it will add that file once done in same menu choose Mangage config files and press ok on CCcam and press ok on all lines what you just put there they all should have a tick now then press exit turn of the box

Now turn it back on and all channels should work and you should now be Happy i hope this guide has made it easy for you as i didnt have a guide and had to learn my self

P.S The attached file needs to be unzipped you dont want the . zip you want the file inside on your stick

Second p.s.s just adding as forgot at first subtitles will be turned on press subtitle button on controller and press OK on off ENJOY

SKYDR / DOC1984


Edit CCcam+ Newcamd accounts & MGcamd Plug setting.

CS share protocol settings.

Edit CCcam+Newcamd accounts:

1. Prepare an available Cccam code and select it, as following code format:



C: test.dm700.com 63001 ah4Cf5hCh e85e1104D yes

N: test.dm800.com 12000 user1008 password102 01 02 03 04 05 06 07 08 09 10 11 12 13 14

2. Use Wordpad to open “Cccam.CFG” file , and copy the available code into the wordpad and save it.

3. Then copy the Cccam.CFG file with available code into your U disk root list.

4. Connect the USB driver with the HD model’s usb port.

5. Press "menu" into Cccam setting ,select Cccam Plug Setting and OK.


6. Select read CCcam.cfg From USB and press OK.


7. After read the available code ,please select Account Management and press OK.




8. You can select maximum 4 CCcam accounts at one time, but for newcamd accounts not be limited.
After activate the sharing accounts.

9. For MGcamd Plug setting.

Our enable Mgcamd protocol for patch CCcam.
Some channels for Europe , the channels decoded don`t use actual CAID, but used other CAID, so our need a replace.list to patch the actual CAID to other.



10.Edit and Copy the replace.lst and Ignore list to U disk root list, then press " update replace.list by USB device or Update ignore.list by USB device" to load the files and save the files to STB.













11. Twin protocol:


Twin protocol is satellite share protocol, user need a satellite dongle connect with serial cable RS232 to the STB`s Serial prot. Then select "ON" the function.










12. Network Local settings:

Select Network Local Setting and press OK.






13. At DHCP select “ON” and then select “Apply “ press OK.




14. When everything is ready ,please press “Standby” ,then reboot the model again.
So the sharing setting is now finished.

 

  • Upvote 2
Link to comment
Share on other sites

www.world-of-satellite.co.uk/Digital-Satellite-Receivers/Vu/VU-Plus-Ultimo-HD-PVR-Triple-Tuner-DVB-S-S2-Linux-Enigma-2-Satellite-Receiver-including-500GB-HDD-installed

 

looking to buy this box, they pre-install the firmware for you... anyone know which one I need for sky n that

Link to comment
Share on other sites

www.world-of-satellite.co.uk/Digital-Satellite-Receivers/Vu/VU-Plus-Ultimo-HD-PVR-Triple-Tuner-DVB-S-S2-Linux-Enigma-2-Satellite-Receiver-including-500GB-HDD-installed

 

looking to buy this box, they pre-install the firmware for you... anyone know which one I need for sky n that

 

get vix 

 

its the best out

 

im currently on the openvix which just updates everyday instead of waiting for the official drop which is long 

Link to comment
Share on other sites

Some areas aren't allowed dishes anymore

my things got some WEDGE dish that is connected to all the houses so it should be fine i just got to find a way to wire it around which is gonna be long..ill test it first to see if it works anyhow before i wire some long stuff

 

Yeah you'll be good fam. Unless they ripped out cables in your yard.

Link to comment
Share on other sites

Need to pay subs dst

Get test lines first and then get a month or 3 months

I use cskingz

Link to comment
Share on other sites

Need to pay subs dst

Get test lines first and then get a month or 3 months

I use cskingz

 

Yeah cskingz are bless, used them a while back.

 

/

Can I use a dm500?

I don't need hd or recording just sky channels

 

If you get the DM500 make sure it ain't the early ones cos they weren't HD and there's alot of boog copies about of the Dreamboxes so make sure you get it legit. Aldo check how you connect to it, cos the early ones needed some weird kinda cable to hookup and edit files.

 

Or what other cheap boxes are available?

 

Openbox or the Amika

 

yeh just found one don...got the test running...sh*t is SMOOTH...CALM

 

will have to cop..think its like 38 for a year

 

£38 for the year is good, just make sure it's a legit sub.

 

yeh just found one don...got the test running...sh*t is SMOOTH...CALM

 

will have to cop..think its like 38 for a year

 

Did you do anything other than what was previously posted? I'm going to have a go this weekend and you've got the same box as me

 

:Y:

Link to comment
Share on other sites

got it all sorted ...so glad im fucking good at wiring. Had a wire for my internet running from downstairs thru virgin media into my room...took the router out my room put a spliter downstairs...used the wire already wired underneath the laminate flooring upstairs and connected it through the sky dish port. 

 

Got some powerline plugs (advised by mr braund) and plugged one into the router which is now downstairs and the other upstairs...perfect

 

... got my sub from cs-kings

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...